Hookshot Guide
Independent community guide

Hookshot Crash Fix: Black Screen, Memory Leak and Crashes

This page groups Hookshot problems by symptom. Each entry separates the symptom, what official documentation or community reports say, and what you can check. A setting reported by one player is not an official repair. Keep your logs and compare the result on your own system.

Already using Longshot? Symptoms and troubleshooting steps may differ. Read the Longshot and Hookshot comparison.

On this page

Hookshot Memory Leak

Symptom: Memory use keeps rising during play. Castle Town may become increasingly slow, followed by a crash.

What reports say: Reddit user report (r/SwitchPirates2): a player says adding RX_VK_COMPACT=1 to their configuration stopped the leak on their machine. This is a user-reported action, not an official fix. No official confirmation of this setting as a leak repair is cited here, and it may not help on every GPU.

What to check: Watch your own memory-use trend during play. Record the Hookshot release, such as v2.1.0, and your exact GPU before comparing another player's result. Keep the log if the game closes.

Hookshot Crashing or Freezing Mid-Game

Symptom: The game exits or freezes after some play time; a log may show device loss or a graphics-driver timeout.

What reports say: Reddit user reports (r/SwitchPirates2) include a player who says they played for hours without another crash after turning off frame generation. Other users point to their driver versions. These are results on individual machines, not a repair established for every setup.

What to check: Compare a run with frame generation off, update the graphics driver, and save hookshot_log.txt with the exact error. Change one setting at a time so the result remains interpretable.

Hookshot AMD Black Screen

Some Windows AMD users report a black screen, driver timeout, VK_ERROR_DEVICE_LOST, or a frozen picture while audio continues. These are community reports, not a diagnosis for every AMD card.

AMD black screen or device loss

Symptom: A black screen, driver timeout, device loss, or frozen picture with audio.

Cause or evidence: Community reports describe incidents across different cards, drivers and situations. They do not establish one cause for every case.

Action: Update your graphics driver. Record your GPU, driver and Hookshot version, then check hookshot_log.txt and compare your case with community reports. The README describes a separate setting for certain AMD texture artifacts; it is not a general black-screen fix.

Why does Hookshot show a black screen on an AMD GPU?

Some Windows AMD users report black screens and device-loss errors. Update your driver, inspect your log and compare your system with community reports; they do not establish a single cause for all cards.

Hookshot Intel Black Screen or Crash

Intel black screen or crash

Symptom: Black screen after the intro, device loss while loading, or a Linux ANV crash.

Cause or evidence: Community reports describe Arc and Core Ultra incidents. A common root cause has not been established for every machine.

Action: Update the graphics driver. Record your GPU, operating system, driver and Hookshot version, keep the log, and compare your case with community reports. A driver update is not a guaranteed repair.

Why does Hookshot crash on Intel Arc or Core Ultra graphics?

Community reports include black-screen, device-loss and Linux ANV crashes. Record your driver, version and log before comparing cases.

Hookshot Missing Mesh Shaders / Parts of the Picture

Missing mesh shaders or parts of the picture

Symptom: A mesh-shader warning or missing parts of models or scenery.

Cause or evidence: Hookshot requires a GPU and driver with mesh shaders. Cards without them are unsupported; the README describes an incomplete fallback.

Action: Update the driver and check whether the Vulkan device exposes VK_EXT_mesh_shader. If the hardware lacks that feature, do not treat the fallback as full support. Read the requirements.

Can Hookshot run on a GPU without mesh shaders?

The README calls these cards unsupported. Its described fallback leaves some mesh draws out, so parts of the picture may be missing.

Hookshot Low FPS, Stutter and Frame Generation

Symptom: Frame rate falls at higher resolution, especially in Castle Town. Some players also report more crashes with frame generation enabled.

What reports say: Reddit user report (r/SwitchPirates2): one player described 60–80 FPS in many areas at 1440p and about 20 FPS in Castle Town. That is one machine's observation, not a general performance benchmark. Reports about frame generation and crashes also vary by setup.

What to check: Lower the render resolution for comparison, turn off frame generation, and look at CPU and GPU use while the slowdown happens. Keep the same location and settings when comparing runs.

What to check — Windows NVIDIA stutter on every start: If places you have already visited still stutter on each launch, the Hookshot README and Longshot official Help describe an NVIDIA driver shader cache that may be too small; the first start prepares about 2 GB of pipelines. In NVIDIA Control Panel, open Manage 3D settings and set Shader Cache Size to Unlimited or 10 GB. This check concerns repeated stutter after shader preparation, not every low-FPS case.

Controller and Menu Problems

  1. Check controller detection: The Hookshot README marks “Sound, controller, keyboard and saves” as Works. In the menu, check whether Button prompts shows your controller: Auto uses the first connected controller. Then compare the checks below. A Works label does not rule out a problem on your machine. Source: Hookshot README.
  2. In-game menu stays closed: Press F1; it always opens the menu. Insert and Esc also open it unless Controls → Menu shortcut has been changed. On a controller, press Home or Select and Start together. On a DualShock 4 or DualSense, click the touchpad. Source: Longshot official Help.
  3. A and B are swapped: Open Controls → Controls and check Layout preset. The default has A on the right face button; Xbox / PC and Swap Face put A on the bottom one. To rebind, choose a row and the Gamepad or Keyboard column, press Enter, then press the new button. Esc cancels, Delete clears it, and Reset to defaults restores the bindings. Hookshot's README calls the input columns Input 1 or 2 and Key 1 or 2. Source: Longshot official Help; Hookshot README.
  4. Wrong button icons: On the same Controls page, Button prompts chooses which icons the game shows; it does not change what the buttons do. Check Layout preset first, then change Button prompts if the icons still do not match your controller. Source: Longshot official Help; Hookshot README.

Sources and version scope: The menu paths and button actions above come from Longshot official Help. Longshot continues Hookshot and started from Hookshot v2.0.5. The Hookshot README also documents several of these steps, with different names for some rebinding columns. Follow the menu labels in the version you have installed.

Hookshot Build Stops Before Completion

Build stops before completion

Symptom: Builder fails before the game is ready.

Cause or evidence: The exact cause depends on the error. Documented prerequisites include a matching game copy, internet for downloads, and about 60 GB free while building.

Action: Check those prerequisites and keep the exact error and log so you can report the problem when the project issue tracker is available. Do not assume a cache or antivirus change will fix an unidentified error.

Hookshot Game Version Is Not Supported

Game version is not supported

Symptom: Builder reports that the version is unsupported or names build e0f3ccfa.

Cause or evidence: The selected game or update does not match the supported identifiers.

Action: Check program 0400486024DEC000, update v131072 and build e0f3ccfa. Select your matching .nup or romfs and exefs folders. Verify the current identifiers in the README.

Hookshot Save or Settings Problem After Nightly

Save or settings problem after nightly

Symptom: Saves or settings stop working after a nightly development build.

Cause or evidence: The README says nightly builds are untested and may break saves or settings.

Action: Back up saves and settings before trying nightly. If damage has already occurred, use a backup if you have one and report the problem. Recovery is not guaranteed. Read the nightly warning.

Can a Hookshot nightly build damage my save?

Yes. The README warns that nightly is untested and may break saves or settings. Back them up first.

Hookshot A1 Video Player Dependency Update Fails

Symptom: The in-game video player reports that an A1 dependency update failed.

What reports say: Reddit user report (r/SwitchPirates2): a player described this error. No official explanation for that particular report is cited here.

What to check: Confirm the Hookshot release you are using, including whether it is v2.1.0, and save the complete error wording and log. Do not reinstall the whole game solely because of this report.

Hookshot Linux /dev/udmabuf Permission Warning

Linux /dev/udmabuf permission warning

Symptom: Hookshot warns that it cannot access /dev/udmabuf.

Cause or evidence: The game user lacks read/write permission, so Hookshot falls back to host-pointer imports. This can be much slower on AMD/RADV.

Action: Check the device and user identity. Follow the README's device-specific udev rule or dedicated-group guidance for your session type. NVIDIA proprietary-driver users may ignore this particular warning. Do not run as root or make the device world-writable. Read the Linux permissions section.